5 Camera Setting and Adjustment
42
UHL-43 2005 VER1 (E)
5.6 Displays in the
Viewfinder
,QDGGLWLRQWRWKH/('LQGLFDWRUVRQWKHYLHZ¿QGHUPDUNHUV
DQGFKDUDFWHUVDUHDOVRGLVSOD\HGRQWKHYLHZ¿QGHUVFUHHQ
Details are provided below.
Display Mode
The display mode sets the markers and characters to be
GLVSOD\HGLQWKHYLHZ¿QGHU
Reference
See
"5.2 Menu structures and contents"
for how the
display mode is set from the menu.
Viewfinder Display
Ŷ
Status Display
㻞㻝㻢㻜㻼㻡㻥
㻲㻭㻺㻍㻍
㻗䠍䠎䡀䠞
㻝㻛㻝㻜㻜
㻲㻡㻤
㼆㻟㻣
㼆㻲㻾
㻞㻮
㻭
㼀㻱㻹㻼㻍㻍㻍
㻿㻷
㻝㻞㻚㻜㼂
㻿㼂
㻻㻭㻯
㻡㻚㻜
㻭㼂㻯㻙㻰
㻭㼀㼃
SCAN FORMAT
①
⑬
LENS REMOTE
⑫
IRIS
value
⑩
AVC Indicator
⑪
ATW
Indicator
⑭
ZOOM Indicator
⑮
FOCUS Indicator
⑯
SHUTTER Indicator
Camera temperature warning
③
Camera Fan status
②
SKIN DTL ON
⑤
GAIN UP value
⑥
ND, CC filter indication
⑦
AWB Memory Channel
⑧
External Power Voltage
④
⑨
OAC Indicator
⑰
Super V Indicator
Ŷ
Function Display in the Viewfinder
①
SCAN FORMAT
Displays the setting values for the operation format of the
camera.
②
Camera Fan Status
The fan status is displayed.
AUTO : Fan is in the AUTO mode.
Displayed when the CHAR switch is pressed.
)$1 'LVSOD\HGÀDVKLQJZKHQWKHIDQKDVVWRSSHG
abnormally.
③
Camera temperature warning
Displays when the temperature inside the Camera exceeds the
recommended maximum.
④
External power supply voltage
Displays the external power supply voltage when the external
power supply voltage is used to operate the camera.
⑤
SKIN DTL ON/OFF
“SK” is displayed when the SKIN DTL function is ON.
⑥
GAIN UP value
Displays for 2 seconds when the increment of the step gain is
switched.
The step position is one of the following: -3dB, 0dB, +3dB,
+6dB, +9dB, +12dB.
⑦
ND and CC filter numbers
ND
1
2
3
4
5
CLEAR
1/4ND
1/8ND
1/16ND
1/64ND
CC
A
B
C
D
E
3200K
4300K
6300K
CROSS
3200K
(OPTION)
⑧
AWB memory channel
The memory selected by the AWB SELECT switch is
displayed.
A : A-ch memory
B : B-ch memory
O : White balance adjustment is in the preset condition
(3200K).
⑨
OAC Indicator
Displays when "OAC GUIDE MARK" is set to "ON" in the
0HQXVHWWLQJ9,'(2$'-8670(17ĺ237,&$/
ABERRATION CORR.").
2$&
: Displays for 2 seconds when the aberration correction
value is properly received from the serial lens. The
GLVSOD\FRQWLQXHVWRÀDVKZKHQHLWKHURI=,)LV
displayed. Also it is displayed while CHAR switch is
pressed.
2$&
=
: Flashes when the zoom position information of the lens
is not linked normally. Please move the zoom.
2$&
,
: Flashes when the iris position information of the lens is
not linked normally. Please move the iris.
2$&
)
: Flashes when the focus position information of the lens
is not linked normally. Please move the focus.
⑩
AVC Indicator
Displayed during AVC operation.
AVC-D : DAY mode
AVC-N : NIGHT mode
⑪
ATW Indicator
Displayed during ATW operation.
⑫
IRIS value
Displayed when the lens is connected.
⑬
LENS REMOTE
Displayed when the operation of the lens is remote controlled
(at the OCP-300, etc.). The remote operation of the lens is
acquired or released using the operation control panel.
⑭
ZOOM indicator
Displays the lens zoom position (0 to 100).
⑮
FOCUS indicator
Displays the lens focus position (0 to 100).
⑯
Shutter indicator
Displays the shutter speed value when the Shutter is turned
on.
⑰
Super V Indicator
Appears for 2 seconds when the Super V is turned on. Also it
is displayed while CHAR switch is pressed.
Note
Super V function works only on Interlace formats 1080i.
