Ikegami UHL-43, Руководство по эксплуатации

Страница: 34 / 62

5 Camera Setting and Adjustment
24 UHL-43 2005 VER1 (E)
<< VIDEO ADJUSTMENT continued >>
Menu Item
Initial
setting
Setting value Description, Remarks
PROCESS SETUP
― STEP GAIN
0 -6, -3, 0, +3, +6, +9, +12 Sets the step gain.
― GAIN
― R
0.0 -100 to +100
Sets the gain value of M/G/R/B.
The gain value decreases in the direction of “-100” and increases in the direction
of “+100”.
― G
0.0 -100 to +100
― B
0.0 -100 to +100
― M
0.0 -100 to +100
― MANUAL CLR
― BLK PRS/STR
OFF
-11, -9, -7, -5, -3, +3, +5, +7,
+9, +11, OFF
Sets the level of BLK PRS/STR.
― GAMMA TYPE
NORMAL NORMAL, CUSTOM1-5
Selects the type of gamma curve.
NORMAL : Normal gamma curve
CUSTOM1-5 : Custom gamma curve
Refer to the "CUSTOM GAMMA" for custom gamma data editing.
― STEP GAMMA
0.45 0.45, 0.40, 0.35, OFF Sets the step gamma.
―
GAMMA
―
R
0.0 -100 to +100
Sets the gamma value of M/R/B.
The gamma value decreases in the direction of “-100” and increases in the
direction of “+100”.
―
B
0.0 -100 to +100
―
M
0.0 -100 to +100
― MANUAL CLR
―
PED
―
R
0.0 -100 to +100
Sets the pedestal value of M/R/B.
The pedestal value decreases in the direction of “-100” and increases in the
direction of “+100”.
―
B
0.0 -100 to +100
―
M
0.0 -100 to +100
― MANUAL CLR
― FLARE
― R
0.0 -100 to +100
Sets the flare value of G/R/B.
The flare value decreases in the direction of “-100” and increases in the direction
of “+100”.
― G
0.0 -100 to +100
― B
0.0 -100 to +100
― MANUAL CLR
― DTL
Sets the various Detail correction settings.
― GAIN
0.0 -100 to +100
Sets the detail amount.
The detail amount decreases in the direction of “-100” and increases in the
direction of “+100”.
― FREQUENCY
17.0 13.0 to 24.0 Sets the horizontal peak frequency of detail correction.
― BLACK WHTE
0.0 -100 to +100 Sets the balance between dark area and bright area.
― BALANCE
0.0 -100 to +100 Sets the balance of the amount between horizontal detail and vertical detail.
― THRESH
0.0 -100 to +100 Sets the lower limit level to mix the detail correction.
― FINE
2 0, 1, 2, 3, 4, 5, 6, 7, 8 Reduces the amount of correction for edges with large brightness differences.
― NOISE SUP
0.0 -100 to +100 Sets the reduction amount of noise.
― MANUAL CLR
Resets all changes of DTL back to previous setting.
― HI-LIGHT DTL SETUP
― HI-LIGHT DTL
OFF ON, OFF Enable the high light detail correction.
― GAIN
- 0to+100
Sets the HI-LIGHT DTL amount.
The detail amount on the high light area increases in the direction of “+100”.
― LIMIT
- -100 to +100 Sets the limit level of HI-LIGHT DTL.
― KNEE
MANUAL MANUAL, AUTO, OFF Selects the knee function.
― SMOOTH KNEE SETUP
― SMOOTH KNEE
TYPE1
OFF, TYPE1, TYPE2,
TYPE3
Selects the type of SMOOTH KNEE.
― TEST PULSE
OFF ON, OFF Enable the TEST PULSE to adjust SMOOTH KNEE.
― POINT
75 -100 to +100
Sets the curve of SMOOTH KNEE.
― SLOPE
10 -100 to +100
― LOAD INIT
CANCEL CANCEL, INDIV, ALL Resets the data of SMOOTH KNEE.
― MATRIX
1 1, 2, 3, OFF Select the Matrix mode.
― ADVANCED MATRIX
OFF ON, OFF Turns on/off the advanced matrix.
― HV SLIM DTL TYPE
H ONLY H ONLY, V ONLY, H+V Sets the type of SLIM DTL.
― V SLIM DTL FREQ
A A, B, C, D Sets the boost frequency type of SLIM DTL.
― NR MODE
OFF OFF, LOW, HIGH Sets the NR (noise reducer).
― DOWN CONV FILTER
STD STD, HI, HQ, LOW Setting of FIR-FILTER when the 4K image is converted to HD (1080i & 1080p)
<< VIDEO ADJUSTMENT continues to the next page >>