Ikegami UHL-43, Руководство по эксплуатации

Страница: 14 / 62

2 NAME and FUNCTION
4 UHL-43 2005 VER1 (E)
Pin
No.
Name Function I/O
⑦
IRIS FOLLOW
Control output of lens iris
) 9“9
9“9
) 9“9
9“9
&/26( 9“9
(2.1V to 2.9V)
=LQ N ȍ “ N ȍ RU
more)
IN
⑧
IRIS REM/AUTO
Switching between REMOTE/
AUTO of IRIS
5(027( 9“9
=RXW Nȍ“NȍRU
less)
AUTO : 0.5V or less
=RXW NȍRUOHVV
RUNȍRUPRUH
=LQ Nȍ“NȍRUOHVV
OUT
⑨
EXT ANS
Input/output of answer signals from
the external system
,1 9ȍRUOHVV=RXW N
ȍRUOHVV
287 23(1 =RXW 0 ȍ RU
more
=LQ Nȍ“NȍRUPRUH
IN
⑩
ZOOM FOLLOW
Control output of lens zoom
:,'( 9“9
9“9
7(/( 9“9
9“9
=LQ Nȍ“NȍRUPRUH
=RXW Nȍ“NȍRUOHVV
IN
⑪
6(5,$//(16ĺ
CAMERA
/FOCUS FOLLOW
Serial data reception (LENS --->
CAMERA)
+0.5V CMOS level
9&&9“9
Control output of lens focus
&ORVHHQG9“9
9“9
,Q¿QLWHHQG9“9
9“9
=LQ Nȍ“NȍRUPRUH
=RXW Nȍ“NȍRUOHVV OUT
⑫
6(5,$/&$0(5$ĺ
LENS
Serial data transmission (CAMERA
---> LENS)
+0.5V CMOS level
9&&9“9
OUT
(The values indicated in ( ) are standard values in 2/3"
Camera/Lens.
IN
: Camera <--- Lens
OUT : Camera ---> Lens
(2) MIC connector
To connect a microphone or to input a line level audio signal.
1 2
3
Plug receptacle HA16PRM-3S (05)
Pin No. Name
①
Shield
②
Hot
③
Cold
Refer to
"Chapter 5 Camera Setting and Adjustment"
for the power to the microphone and the settings such as input
level adjustment.
(3) FRONT TALLY lamp
Lights up red when the R TALLY signal is input. Refer to
"Chapter 5 Camera Setting and Adjustment"
to
adjust the brightness or turn off.
(4) Camera number indicator
Indication area of the assigned camera number. Refer to
"Chapter 5 Camera Setting and Adjustment"
to
assign the camera number.
(5) Emergency manual optical filter control
)RUHPHUJHQF\WRURWDWH¿OWHUGLVFE\VFUHZGULYHU5HPRYH
UXEEHUFDSDQGWXUQXVLQJDÀDWKHDGVFUHZGULYHU
Caution
Turn off the power before adjusting or set FILTER SERVO
CONT to MANUAL from the Menu to prevent damage to
the motor drive.
Caution
Keep the rubber cap after adjusting to protect against dust
entering the camera.
(6) Lens cable clamp
Clamp the lens cable.
(7) Lens lock lever
A lever used to lock the lens mount. Insert the lens, and then
turn and tighten the lens mount ring with the lever.
(8) Lens mount
Various 2/3-inch broadcast lenses can be used.