Ikegami UHL-43, Руководство по эксплуатации

Страница: 20 / 62

4 Operation
10 UHL-43 2005 VER1 (E)
Chapter 4 Operation
4.1 Turning ON Power
After connecting with the peripheral equipment, turn on the
power. This device does not have a power supply switch. It is
turned on by operating the POWER switch of the connected
AC adapter, etc.
Caution
When connecting or disconnecting the peripheral equipment,
be sure that the POWER switch of the AC adapter is "OFF."
AC Adapter
DC POWER Cable DC IN Connector
DC OUT
Connector
POWER
Switch
Camera rear side
4.2 Checking the output signal
After turning ON the power, make sure the video signal is
properly output by checking the monitor connected to the
MONITOR connector.
H LM905W C S H D
Coaxial
cable
SDI Input
Monitor
output
Monitor
4.3 Executing automatic setup
The camera is equipped with an auto setup function that
automatically adjusts various levels and settings using the
CPU of the camera.
---
Auto Setup function
(1) FULL auto setup
Executes all auto setup items in the camera. This is mainly
executed after maintenance and inspection. The auto setup
chart is required.
(2) LEVEL auto setup
Set the video processing levels. This process can be executed
daily before using the camera. The auto setup chart is
required.
(3) FULL QUICK auto setup
Because the FULL QUICK auto setup uses an electrical test
pulse signal built in the camera, you do not need an external
chart. Setup is possible even when you cannot shoot a chart.
(4) QUICK auto setup
Because the QUICK auto setup uses a test pulse, the setup
does not include adjustment of some circuits, CMOS sensors,
lens, etc. which are in the path prior to the point of injection
of the test signal.
(5) Auto White Balance (AWB)
Sets the white level of the R and B signals. White balance
needs to be readjusted when the color temperature of the
OLJKWVRXUFHFKDQJHVRURSWLFDO¿OWHUVDUHFKDQJHGEHFDXVH
white balance is affected by the color temperature of the light
VRXUFHDQGE\RSWLFDO¿OWHUV
(6) Auto Black Balance (ABB)
Sets the black level of the R, G and B signals. Though black
balance is affected neither by the color temperature of the
OLJKWVRXUFHQRUE\RSWLFDO¿OWHUVLWQHHGVWREHUHDGMXVWHG
when GAIN is changed or the ambient temperature has
FKDQJHGVLJQL¿FDQWO\
Note
$XWRVHWXSDGMXVWVWKHFDPHUDEDVHGRQDUHIHUHQFH¿OH7KLV
UHIHUHQFH¿OHLVFUHDWHGLQWKHPHPRU\SULRUWRVKLSPHQW7KH
UHIHUHQFH¿OHQHHGVWREHFUHDWHGDJDLQLI\RXZDQWWRFKDQJH
the reference for auto setup of the camera.
Auto setup can be activated from the camera or remote
controller. See the table in the next page for which functions
are adjusted by each auto setup process.