Ikegami UHL-43, Руководство по эксплуатации

Страница: 42 / 62

5 Camera Setting and Adjustment
32 UHL-43 2005 VER1 (E)
<< SYSTEM continued >>
Menu Item
Initial
setting
Setting value Description, Remarks
ETHERNET(E)
Sets the ETHERNET settings.
― GROUP ID
0 0 to 99 Sets the GROUP ID of the camera for ICNP.
― DEVICE ID
1 1 to 99 Sets the DEVICE ID of the camera for ICNP.
― DEVICE NAME
(-------------
---)
16 characters Allows the user to name the camera for ICNP.
― IP ADDRESS
― IP ADDRESS
192.168.1.100 0.0.0.0. to 255.255.255.255 Sets the IP address of the camera for network control.
― SUBNET MASK
255.255.255.0 0.0.0.0. to 255.255.255.255 Sets the SUBNET MASK for the IP ADDRESS of the camera.
― DEFAULT GATEWAY
0.0.0.0 0.0.0.0. to 255.255.255.255 Sets the DEFAULT GATEWAY for the IP ADDRESS of the camera.
―
SPEED/DUPLEX
AUTO
NEGOTIATION
AUTO NEGOTIATION,
10M HALF, 10M FULL,
100M HALF, 100M FULL
Sets the communication method and speed for Ethernet camera control.
― SET
READY
REBOOT CANCEL,
REBOOT EXECUTE
Executes the IP ADDRESS settings preset above.
― UDP CONTROL
― ICCP PORT NO
50001 0 to 65535 Sets the port number for ICCP.
― ICNP PORT NOR
50002 0 to 65535 Sets the port number for ICNP.
― MASTER
― PRIMARY
DISABLE DISABLE, ENABLE Enable primary device via ICNP.
― IP ADDRESS
192.168.1.220 0.0.0.0. to 255.255.255.255 Sets the IP ADDRESS corresponding to primary device.
― ICNP PORT NO
50002 0 to 65535 Sets the port number for primary device.
― SECONDARY
DISABLE DISABLE, ENABLE Enable a secondary device via ICNP.
― IP ADDRESS
192.168.1.140 0.0.0.0. to 255.255.255.255 Sets the IP ADDRESS corresponding to secondary device.
― ICNP PORT NO
50002 0 to 65535 Sets the port number for secondary device.
CAMERA ID SETUP （ E ）
― PROGRAM NO. （ E ）
1 1 to 99, OFF
Sets the camera No. at the time of program operation, etc. If the display of the
camera No. is set on the OCP side, the set ID No. is displayed. If the camera No.
is set on the camera side, the set ID No. is displayed on OCP.
CAM STATUS NAME SET(E)
― FILTER NAME
― ND
Sets the name of ND filters.
― 1:
1
1, 2, 3, 4, 5, 1/4, 1/8, 1/16,
&/5
&8670
Sets th name of ND filters.
The name can be customized in mode CUSTM(custom).
― 2:
2
― 3:
3
― 4:
4
― 5:
5
―
CC
Sets the name of CC filters.
― A:
A
A, B, C, D, E, 3200K,
4300K, 6300K, CROSS,
CUSTM
Sets th name of CC filters.
Name can be customized in mode CUSTM(custom).
― B:
B
― C:
C
―
D:
D
― E:
E
―
GAMMA NAME
Sets the name of Gamma setting.
―
CUSTOM GAMMA:
DEFAULT DEFAULT, CUSTOM Selects the default name or custom name of Gamma.
―
1:
CST1
The name can be customized in mode CUSTOM.
― 2:
CST2
― 3:
CST3
― 4:
CST4
― 5:
HLG
― MATRIX NAME
― MATRIX SELECT:
DEFAULT DEFAULT, CUSTOM Selects the default name or custom name of Matrix.
― OFF:
OFF
The name can be customized in mode CUSTOM.
― BT.709:
709
― SMPTE:
SMPTE
― EBU:
EBU
― BT.2020
2020
― USER1
USER1
― USER2
USER2
<< SYSTEM continues to the next page >>