5 Camera Setting and Adjustment
22
UHL-43 2005 VER1 (E)
■ ⑦
FUNCTION SW
Menu Item
Initial
setting
Setting value
Description, Remarks
FUNC SW1
NONE
NONE, FOCUS ASSIST,
CALL, ABB, AWB, AWB
CH, DISPLAY MODE,
FAN, FILTER LOCAL,
RET
Selects the function to be assigned to each function switch.
If it is set to ABB and AWB, ABB and AWB are performed when the function
switch press and held for approximately 2 seconds.
If it is set to FOCUS ASSIST, the following operation is performed.
The [ASSIST AREA] items on the TOP MENU - FOCUS ASSIST - FOCUS
ASSIST WINDOW screen are switched every time SW is p__ressed.
When a serial lens is attached: Repeats TRIGGER ON < > OFF.
When a lens other than serial lens is attached: Repeats ALWAYS ON <__> OFF
FUNC SW2
NONE
FUNC SW 3/4[HANDLE]
NONE
NONE, ZOOM, FOCUS,
RET/NONE
Sets the function of FUNCTION SW3 and FUNCTION SW4 on the top part of
the handle. To assign it to ZOOM and FOCUS, it requires a serial lens.
ZOOM SPEED
15
0 to 100
Sets the operation speed of ZOOM control.
"0" indicates a slow speed and "100" indicates a high speed.
FOCUS SPEED
15
0 to 100
Sets the operation speed of FOCUS control.
"0" indicates a slow speed and "100" indicates a high speed.
UP/DOWN
NONE
NONE, GAIN, ND, CC
Selects the function to be assigned to UP/DOWN switches.
VTR SW
---
FOCUS ASSIST, RET
Sets a function of the VTR SW on the lens.
If the TRIGGER item on the FOCUS ASSIST menu is set to "LENS VTR",
"FOCUS TRIG" is fixed (information display).
VF F1 SW [VF]
MONO
NONE, CAPTURE,
CHROMA, CPTDISP,
FAN, GAMMA, MAG,
MARKER, MONO,
NOISESUP, PEAKING,
PEAKUP, PRESET,
REVERSE, SCENE, SDI,
TALLY, USRMRK, VSC,
WFM, ZMPEAK, P-IN-
P(VF), GAMMA1.4,
FOCUS ASSIST, P-IN-
P(RET)
Sets the function to the FUNCTION switch F1.
VF F2 SW [VF]
MARKER
Sets the function to the FUNCTION switch F2.
VF F3 SW [VF]
SDI
Sets the function to the FUNCTION switch F3.
VF F4 SW [VF]
TALLY
Sets the function to the FUNCTION switch F4.
