IEI Technology WAFER-LX Скачать руководство пользователя страница 55

Страница: 55 / 144

WAFER-LX User Manual

3.1

Considerations Prior to Installation

Preparing Your Embedded Board

The embedded board contains numerous delicate electronic circuits and components, which can

become damaged as a result of electrostatic discharge (ESD). Thus, prior to installation, please

follow the instructions below:

1. Please turn off the computer and unplug its power cord.

2. When handling the board, avoid touching any metal leads or connectors.

3. It is best to wear an electrostatic discharge (ESD) cuff when handling electronic components

(CPU, RAM).

4. Prior to installing the electronic components, please have these items on top of an anti-static

pad or within an electrostatic shielding container.

Please verify that the power supply is switched off before unplugging the power supply

connector from the motherboard.

Installation Notices

1. Prior to installation, please do not remove the stickers on the system board. These stickers are

required for warranty validation.

2. Prior to the installation of the system board or any hardware, please first carefully read the

information in the provided manual.

3. Before using the product, please verify that all cables and power connectors are connected.

4. To prevent damage to the PCB board, please do not allow screws to come in contact with the

PCB circuit, connector pins, or its components.

5. Please make sure there are no leftover screws or metal components placed on the PCB board

or within the computer casing.

6. Please do not place the computer system on an uneven surface.

7. Turning on the computer power during the installation process can lead to damage to system

components as well as physical harm to the user.

If you are uncertain about any installation steps or have a problem related to the use of the

product, please consult a certified computer technician.

3-2

IEI

Technology, Corp.

Содержание WAFER-LX

















































































































































Результаты поиска

Содержание WAFER-LX

Отзывы:

Бренды по названию

Популярные бренды

IEI Technology WAFER-LX, Руководство пользователя

Результаты поиска

Содержание WAFER-LX

Отзывы:

Бренды по названию

Популярные бренды