Idex Hale Sam, Техническое руководство

Страница: 31 / 223

11
2.3.1.1.1 SAM Auto Mode Interface
Use Auto Mode to verify the existence of an indicated SYMPTOM. Then after troubleshooting, re-
pair, and testing; use Auto Mode to verify SAM automation has been restored. Refer to the local
guidelines provided by the AHJ, OEM documentation/manuals, and then if other instruction is
NOT available use the SAM OIM (FSG-MNL-00210), section 6, for general operating instructions
for SAM automated operation of the apparatus.
2.3.1.1.2
SAM Manual Mode Interface
Typically, for maintenance purposes, exit Auto Mode and use Manual Mode to control the SAM
system. Hale also recommends exiting Auto Mode before entering any OEM/technician password
on either of the touchscreen controllers.
Manual Mode can be accessed at any time. However, the default SAM Control Center is the land-
ing screen (shown on left side of Figure 1) until the pump is engaged at which time, the Auto
Mode Home screen (shown on right-side of Figure 1) is displayed.
Figure 1. Entering Manual Mode (From Landing or Home Screen)
No matter which screen is displayed, touch the MANUAL MODE (orange) button and then touch
YES (to confirm–see Figure 2) to access SAM Manual mode.
Figure 2. Popup Yes/No Buttons