Idex Hale Sam, Техническое руководство

Страница: 215 / 223

195
C. Touch DONE button.
D. Verify text representing color/none is displayed in associated Color: text box (left-
hand bottom of screen),
E. Perform Saving The Configuration Changes, paragraph 6.19 (page 197).
6.16. How To Change The Order Of Intakes On The Home Screen
Perform the following to change the order in which the friendly name of an intake valve is dis-
played on any of the SAM Control Center screens (quicksets, discharge settings, or manual valve
control screens).
A.
Use paragraph 6.8 (page 191) to access the Index (0-11) box.
B. Touch Index: text box. Number pad, CLEAR and DONE buttons appear.
(See Figure 161, page 191.)
C. Using number pad, type desired index number.
NOTES
Only intakes with index numbers 0 thru 3 appear on the home screen. Intakes appear
ordered top to bottom (0 = top, 3= bottom).
Do NOT assign duplicate index numbers for the same device Function (Intakes are
assigned a function number of two [2]).
D. Touch DONE button.
E. Perform Saving The Configuration Changes, paragraph 6.19 (page 197).
6.17. Configuring SAM For A Foam System
The SAM system is always Foam Capable. To turn on foam the user must enable the valves to be
foam capable. The sections below describe how to enable each valve to be foam capable.
6.17.1
Configuring A Foam Preset
If a discharge is to be used for foam and initialized by SAM create a foam preset for the dis-
charge as follows.
A.
Enter system options.
Touch (and hold if required) until loading icon completes a circle.
Enter appropriate password to access BAM tab (see Table 6).
Touch BAM tab.
B. Touch Configuration Menu button.
C. Add foam preset to desired discharge as follows.
On Select Device Menu, touch desired discharge.
On Edit Valve screen, touch Preset CAFS (0-4): text box.
Using pop up number pad, touch 4.
Touch ENTER.
On Edit Valve screen, touch CAFS Capable (0-3): text box.
Using pop up number pad, touch 2.
Touch ENTER.