Idex Hale Sam, Техническое руководство

Страница: 47 / 223

27
Table 1. Akron Brass Valve Applications (Intake/Special) – CONTINUED
SAM Application
(Position)
Akron Brass Valve
(Size) 1/
Static
Address
Tank-To-Pump 3 in
(Refer to FSG-MNL-00212, Table 1, Tank-To-Pump)
(0xA7)
4 in
(Refer to FSG-MNL-00212, Table 1, Tank-To-Pump)
Auxiliary Intake (Pony)
(Left Rear) 2/
2.5 in
(Refer to FSG-MNL-00212, Table 1,
Auxiliary Intake [Pony]
)
(0xA8)
(Right Front) 2/ 2.5 in
(Refer to FSG-MNL-00212, Table 1,
Auxiliary Intake [Pony]
)
(0xA9)
NOTE 1/ Valve size/part number has NO relation to the address (only application/posi-
tion). Refer to SAM PM (FSG-MNL-00212) for part numbers to ensure the cor-
rect replacement valve is obtained.
NOTE 2/ Hale Products does NOT recommend using the RR or LF Pony positions, due to
MIV proximity.
2.4.5.1 SAM Pump Controller Tank Screen
The tank screen while SAM is in Auto mode provides control of the tank fill valve. To provide addi-
tional cooling for the pump or to fill the onboard water tank faster, open the valve (touch the +
button). To close the valve, touch the – button.
The tank screen provides control of the tank fill or tank-to-pump valve when SAM is in Manual
Mode. To open a valve, touch the + or the OPEN button. To close a valve, touch the – or the
CLOSE button.
Additionally, the screen displays the status of the onboard water tank. By default, a status button
is displayed, which indicates: OK, < 1/3, or EMPTY if the Tank Level is Off (see Figure 19). How-
ever optionally, if Tank Level is On a gauge icon group graphically showing the level in the tank
(see Figure 20).
Figure 19. SAM Pump Controller Tank Screen – Default Water Level Status Indicator