CS-F620TR Programming Software Manual
(rev 1.0) -
LTR Trunking
77
T
YPICAL
F
UNCTIONS AND
C
ONDITIONS
Function
How to Use
Power On
When the radio is first activated, it will briefly display the text entered in the
Opening Text field of the
Field Data
programming screen. It will then show the
firmware version.
System Up/Down
Keys and
Group/MIN
Up/Down Keys
The current System can be displayed by pressing either of the
System Up/Down
keys. Another press of either key will change the system (if there is more than one
system in the radio). The current group can be displayed by pressing either of the
Group Up/Down
keys. Another press of either key will change the group (if there is
more than one group in the system).
Group Dispatch
After the radio has registered, it is normally ready to perform “Group Dispatch”. To
call a base unit or other field units, simply press the
PTT
key. Wait until you get the
PTT “handshake” tone and then start speaking. It is a common mistake for first time
users to attempt to “over talk” this tone, but after a couple of minutes of practice the
user should have no further difficulties. In Group Dispatch mode, all users registered
to a particular group will hear any unit transmitting on that group.
Scan
For a detailed description of how to use the scan function, refer to the
P
0
key
description in the previous table. Remember, many scan functions can be enabled or
prohibited or set to a default on a system-by-system basis. Refer to the fields in the
Scan group in the
LTR
programming screen.