CS-F620TR Programming Software Manual
(rev 1.0) -
LTR Programming Screen
35
At the head of this screen is pertinent information concerning the current selected system.
Each line in this screen can be used to enter repeater channel information. Note that to
delete a row, you can right click on almost any field in the programming screen and
select “Delete” from the menu that appears.
R
EPEATER
S
ETTING
P
ROGRAMMING
S
UB
-S
CREEN
F
IELD
D
ESCRIPTION
T
ABLE
Group
Field
Description
Default
Suggested
Settings
CH
The total number of lines displayed will
indicate the number of LTR repeater channels
for the system being edited. You can enter up
to 20 repeater channels before getting an
“overflow” error.
No user
entry.
No user
entry.
Atr
Select “Home Repeater” or “Return”. If you
select “Home Repeater,” then this repeater
channel will be the home repeater channel. You
can only have one home repeater channel. If
you have already selected one channel as a
home repeater, selecting another for that status
will automatically deselect the previous setting.
Until
one of the
repeater
channel
rows is
selected as
a home
repeater.
For each
row there
after, this
field will
be blank.
Mandatory
field for one
of the rows.
You will get
a in each
Atr row until
you select
one of the
rows as the
home
repeater. That
will clear the
in all
rows. Consult
your LTR
system
operator for
information
on which
repeater
channel is
“home”.
Frequency
RX
Enter from 1.000000 to 520.000000 (though, of
course, the radio will only function for
frequencies it is designed for). This is the radio
receive frequency for this repeater channel.
Blank
System
operator
provided.
Frequency
TX
Enter from 1.000000 to 520.000000 (though, of
course, the radio will only function for
frequencies it is designed for). This is the radio
transmit frequency for this repeater channel.
Blank
System
operator
provided.
W/N
Select “Wide” or “Narrow”. Specify if the
repeater channel you are attempting to utilize is
using wide or narrow band channels.
Wide
(Blank)
System
operator
provided.
RF Pwr
Set to “High” or “Low”. Specify if you wish to
transmit to this repeater channel using high or
low power.
High
(Blank)
Set as
needed.
Invert
RX Data
Select “On” or “Off”. Select whether or not the
radio should expect inverted RX Data.
Off (Blank)
System
operator
provided.
