CS-F620TR Programming Software Manual
(rev 1.0) -
Key & Display Assign Programming Screen
54
Key Function
Description
Fields and/or
Programming
Screens Related to
Priority
Key assigned to this function will cause the “Priority”
system to be selected. The purpose of this is to give the
user instant access to a critical or frequently used system.
The Atr field of the
PassPort
,
LTR
and
“
Conv.”
programming
screens. Amongst
those programming
screens, at least one
system needs to be
set as a “Priority”
even if no
Priority
key is programmed.
Emergency
Key assigned to this function will transmit digit sequence
of the DTMF Encode entry marked “Emergency”.
Atr field of the
DTMF Encode
programming
screen.
Scan
Key assigned to this function will toggle scan between
start and stop. Note, in PassPort, group scan will only
work when registered to the home site. If the User Edit
field and/or Edit TG List field has been enabled and scan
is not active, you can select which groups or systems to
scan or not scan with the
Scan
key.
Select the targeted group or system, press and hold the
Scan
key down until you see “SCAN ADD” or “SCAN
DEL”. This will add or delete systems or groups from
being scanned. A steady “S” icon indicates that the system
or group is in the scan list. No “S” icon indicates that it
has been removed. A blinking “S” indicates scan mode is
active.
See the
PassPort
,
LTR
and “
Conv.”
programming
screens.
Monitor
Key assigned to this function will toggle the radio in and
out of Monitor mode (a “Speaker Icon” will be displayed
when mode is enabled). This disables CTCSS or DTCS
tone code squelch. Useful for monitoring frequency
activity in general without the filter of a coded squelch
inhibiting some potential receive activity.
See the “C. Tone
RX” and “C. Tone
TX” fields in the
“Conv.”
programming screen
to see if the
Conventional
system has tone
coded squelch.
Nuisance Delete
While the radio is in scan, the key assigned to this function
will temporarily delete a system from being scanned. This
will not work for groups. Cycling radio power or changing
systems will clear this setting. Enabling the Save User
Setting field in the
LTR
or
“Conv.”
programming screens
will not affect this function.
NA
Scan Type
Key assigned to this function toggles the scan type
between “Individual” and “Block”. If you’re not using
Block Scan, leave this unassigned.
PassPort
and
LTR
programming
screens.
Speed Dial
Key assigned to this function will bring up a list of DTMF
entries to select and send when activated. These entries are
listed numerically by their order of entry in the
DTMF
Encode
programming screen.
DTMF Encode
programming screen
