CS-F620TR Programming Software Manual
(rev 1.0) -
Key & Display Assign Programming Screen
52
KEY & DISPLAY ASSIGN PROGRAMMING SCREEN
K
EY
& D
ISPLAY
A
SSIGN
P
ROGRAMMING
S
CREEN
I
CON
:
Located in Common folder.
This programming screen allows the programmer to assign and re-assign key functions to
programmable keys and edit miscellaneous DTMF parameters.
The preceding screen shot shows the programmable key defaults for the radio. Double
click on the field you wish to edit. The next table is a description for each row in each
group:
K
EY
& D
ISPLAY
P
ROGRAMMING
S
CREEN
F
IELD
D
ESCRIPTION
T
ABLE
Group
Row
Description
Default
Key
P0 –P4, A, B,
C, D, *, #
A list of all programmable keys. To reassign a function
to a given key, double click on the Assign field of the
key you wish to re-assign and select from the menu that
appears. Note all key functions can be assigned to any
programmable key. Please refer to the screen and table
on page 53 for a list of all key functions that can be
assigned to programmable keys.
Refer to
previous
screen shot.
10 Key
DTMF Mic
Set to “Enable” or “Disable”. Selecting enable allows
for DTMF operation of the optional HM-100TN DTMF
microphone.
Disable
PTT
Over Tone
Set to “On” or “Off”. Selecting “On” will cause the
radio to transmit a short tone as each transmission is de-
keyed. This provides a more “affirmative” end of a
transmission to the party receiving it. This is
particularly useful for radios receiving transmissions in
noisy environments or scenarios (like PassPort selective
call) where the RF carrier from the repeater does not
drop even though the transmitting party has de-keyed.
OFF
