CS-F620TR Programming Software Manual
(rev 1.0) -
DTMF Decode Programming Screen
49
DTMF DECODE PROGRAMMING SCREEN
DTMF D
ECODE
P
ROGRAMMING
S
CREEN
I
CON
:
Located in DTMF Autodial Folder
This programming screen allows the programmer to create, read, edit and delete all
global DTMF Decode entries. This is a global screen and all system programming
screens will refer to this list in the “Decode ch” field.
Note that to delete a row, you can right click on almost any field in the programming
screen and select “Delete” from the menu that appears.
DTMF D
ECODE
P
ROGRAMMING
S
CREEN
F
IELD
D
ESCRIPTION
T
ABLE
Group
Field
Description
Default
Suggested
Settings
No.
The line number of the DTMF Decode entry.
You can have up to 10 entries here before
getting an overflow error.
No user
entry.
No user
entry.
Text
Double click here to enter a text description for
this system (as described on page 13). You can
enter up to 10 characters for this field.
Blank
Set as
needed.
Primary
Code
Enter up to 10 numbers here. This is the
sequence of DTMF digits that is the primary
decode for this row.
Blank
Set as
needed.
Primary
Response
Select “None” or any listed entry (you must
have entries in the
DTMF Encode
programming screen to see a list of selections
here). This is the DTMF response given upon
the proper decode of the digits in the Primary
Code field.
None
Set as
needed.
Secondary
Code
Enter up to 10 numbers here. This is the
sequence of DTMF digits that is the secondary
decode for this row.
Blank
Set as
needed.
Secondary
Response
Select “None” or any listed entry (you must
have entries in the
DTMF Encode
programming screen to see a list of selections
here). This is the DTMF response given upon
the proper decode of the digits in the Secondary
Code field.
None
Set as
needed.
Dead Beat
Enable
Code
Enter up to 10 numbers here. This is the
sequence of DTMF digits that will restore the
radio from DTMF “stun” mode.
Blank
Set as
needed.
