CS-F620TR Programming Software Manual
(rev 1.0) -
PassPort Programming Screen
20
Group
Field
Description
Default
Suggested
Settings
Atr
Select “Priority,” “Phone” or “Phone Off” (or
“Return” to exit without selecting a new
setting). Selecting “Priority” sets this system as
the one to be used if the
Priority
key is
pressed. Note: changing this field to “Priority”
will deselect any other system from being the
priority system. Selecting “Phone” sets this
system as the one to be used if the
Phone
Request
key is pressed. Note: changing this to
“Phone” will deselect any other system from
being the phone request system. Select “Phone
Off” to clear this setting.
If no
system has
been set as
a priority
system.
Otherwise:
Phone OFF
(Blank).
Mandatory
field.
Amongst the
programming
screens for
PassPort
,
LTR
and
Conventional
at least one
system needs
to be set as a
priority
system even
if no
Priority
key is
programmed.
Set as
needed.
Text
Double click here to enter a text description for
this system (as described on page 13). You can
enter up to 10 characters for this field.
Mandatory
field - set as
needed. You
cannot enter
any other
information
on this row
until data for
this field has
been entered.
TG
Talk Group
This field indicates the current number of Talk
Groups (and Select Call MINs) programmed
into this system. Also, this field can be double
clicked to open the PassPort
Talk Group
Setting
programming sub-screen where Talk
Group and MIN information can be edited.
Before proceeding on with the sub-screen here,
ensure that you set your Group ID Start field
correctly. For information on the
Talk Group
Setting
programming sub-screen, please see
that table on page 27.
0
Mandatory
field - set as
needed.
TG
Dec. Pri.
TG
Select “Enable” or “Disable”. Select “Enable”
if you wish to force monitor the Primary Group
(the first group listed in the
Talk Group Setting
programming sub-screen). Selecting “Enable”
here will also turn the “CH” field of the first
row of the PassPort
Talk Group Setting
programming sub-screen red, indicating forced
monitor. If this set to “Enable,” it does not
matter if the radio is in scan mode or not, or
whether CH 1 (primary group) is a Scan
Member or not, the radio will always monitor
this group, even while on roam sites.
Disabled
(Blank)
Disabled
