CS-F620TR Programming Software Manual
(rev 1.0) -
LTR Programming Screen
31
Group
Field
Description
Default
Suggested
Settings
Atr
Select “Priority,” “Phone” or “Phone Off” (or
“Return” to exit without selecting a new
setting). Selecting “Priority” sets this system as
the one to be used if the
Priority
key is
pressed. Note: changing this field to “Priority”
will deselect any other system from being the
priority system. Selecting “Phone” sets this
system as the one to be used if the
Phone
Request
key is pressed. Note: changing this to
“Phone” will deselect any other system from
being the phone request system. Select “Phone
Off” to clear this setting.
If no
system has
been set as
a priority
system.
Otherwise:
Phone OFF
(Blank)
Mandatory
field.
Amongst the
programming
screens for
PassPort
,
LTR
and
Conventional
at least one
system needs
to be set as a
priority
system even
if no
Priority
key is
programmed.
Set as
needed.
Text
Double click here to enter a text description for
this system (as described on page 13). You can
enter up to 10 characters for this field.
Mandatory
field - set as
needed. You
cannot enter
any other
information
on this row
until this field
has been
filled in.
Repeater
Repeater ch
The number in this field indicates the row the
current home channel repeater is located on (in
the
Repeater Setting
programming sub-screen.
Double click here to enter the
Repeater Setting
programming sub-screen (see page 34).
Mandatory
field - set as
needed.
Repeater
Set Area
Bit
Select “ON” or “OFF”. Selecting “ON” enables
the area bit. This is used primarily to
distinguish between to different systems that
may share the same frequency.
OFF
(Blank)
Set as
needed.
TG
Talk Group
This field indicates the current number of talk
groups programmed into this system. To set up
talk groups, double click on this field. For
information on the LTR
Talk Group Setting
programming sub-screen, please see that table
on page 36.
0
Mandatory
field - set as
needed.