IBS MediaClave, Руководство пользователя

Страница: 36 / 74

MediaClave overview
INTEGRA Biosciences
Page 30
4.3.1.11 Flow of the MEDIACLAVE sterilisation cycle
A series of messages appears:
• HEATING UP
• STERILISING (The set sterilisation time begins when the PT100 probe registers the set tempera-
ture.)
• COOLING (The cooling phase begins immediately on completion of the sterilisation phase and con-
tinues until the dispensing temperature is reached.)
• ADD PRODUCT
• Unscrew the cap on the access port and add blood to the cuvette
• Close the cap
• Press END when the entire product has been added
• Close the cover
A series of messages appears:
• HEATING UP
• BOILING
• COOLING
• DISPENSING
ATTENTION:
Press STEP to interrupt the cycle and proceed to the next cycle step. The program cannot
be interrupted during cooling.
NOTE:
A progress printout is printed every x seconds / minutes during the sterilisation cycle (x refers to
the selected print cycle, see section 3.4.4.2).
NOTE:
The cycle progress is monitored and periodically updated on the GUI.
NOTE:
The actual and target temperatures are displayed in the upper right of the screen. The target
temperature must be reached in order for the cycle to progress. (phase change)
NOTE:
The actual sterilisation temperature and countdown timer are displayed in the upper right of
the screen. The sterilisation time is counted down in minutes and seconds.
ATTENTION:
For programs 1–14, proceed to DISPENSE, for PROGRAM 15, proceed to ADD
PRODUCT!
NOTE:
The safety cover opens automatically.
NOTE:
The actual and target cooling temperatures are displayed in the upper right of the screen.
NOTE:
The actual and target cooling temperatures are displayed in the upper right of the screen.
NOTE:
The actual and target cooling temperatures are displayed in the upper right of the screen.