IBS MediaClave, Руководство пользователя

Страница: 17 / 74

User Manual 3.4
INTEGRA Biosciences Page 11
ENGLISH
2.5 Filter and tubing installation
2.5.1 Sterile filter installation
The sterile filter prevents contaminated air from entering into the vessel during operation
• Screw the sterile filter into position (see figure 2.2). Orientation of the text on the filter: Text must be
visible from the rear side.
• Using the milled screw, screw the support pressure tube into the sterile filter (see figure 2.2).
• Connect the end of the support pressure tube and secure it with a nut.
2.6 Moving the MediaClave
2.6.1 Moving procedure
• Remove any items from the top of the MediaClave
• Close vessel lid and safety cover
• Disconnect all cables and tubing
ATTENTION:
Replace the sterile filter at least every six months.
INFO
: Wetness or wearing out of the filter may provoke a pressure test failure!
ATTENTION:
Before moving the MediaClave, it must be cooled down, emptied and disconnected from
the mains
NOTE:
Two persons are required to lift the MediaClave.
ATTENTION:
Never lift the instrument by the cover handle. Carry the instrument, holding it steady and
firmly at the base.
NOTE:
After moving the MediaClave, the accomplishment of an Installation Qualification (IQ) procedure
is strongly recommended!