IBM xSeries 300, Руководство по обслуживанию

Страница: 28 / 160

7. ____ Go to “Connecting the NAS to the Display and Keyboard in the 37U
Rack”.
Connecting the NAS to the Display and Keyboard in the 37U Rack
1. ____ See Figure 1-18 on page 1-15 to route and locate the cables. See
Figure 1-19 on page 1-15 to locate the connectors at the rear side of the NAS.
Attach the cables as follows:
a. ____ Connect the display signal cable
«A¬
to the NAS connector
«1¬
.
b. ____ Plug one
«T¬
connector (PN 80G0638) into the APC connector 4.
c. ____ Route and plug cable
«B¬
(PN 10K8667) from the connector 6 of the
APC card into the Ethernet card connector
«5¬
.
d. ____ Route and plug cable
«C¬
(PN 80G0637) from the
«T¬
connector
located on connector 4 of the APC card into the tailgate connector J2.
e. ____ Plug the mouse cable
«D¬
into NAS connector
«3¬
.
f. ____ Plug the keyboard cable
«E¬
into NAS connector
«2¬
.
g. ____ Plug the power cable
«F¬
into NAS connector
«6¬
.
2. ____ Plug the power cords
«F¬
and
«G¬
into correctly grounded (earthed)
electrical outlets.
3. ____ Secure keyboard cable
«E¬
and mouse cable
«D¬
to the rack using tie
clamps
«H¬
(PN 1159519).
B
Figure 1-17. Display Assembly Installation in a 37U Rack
Installing the NAS and Its Modem
1-14
2220 Setup and Service Guide