IBM xSeries 300, Руководство по обслуживанию

Страница: 104 / 160

FIXED DISK TEST CATEGORY (6/10)
Disk 0 Disk 1 Disk 2 Disk 3
13579 MB 6449 MB
Controller >> >>
Hi-Low >> >>
Funnel Seek >> >>
Track to Track Seek >> >>
Random Seek >> >>
Linear Verify >> >>
Random Verify >> >>
Start Track 0 0
End Track 9999 13327
Default - PrOff - LogAll - PC: 1 - Logleft: 6936
Clear All - Run Screen - Run All - Options - Next Cat - Prev Cat
v
Select the Clear All option to remove all the chevrons >>.
v
Using the arrows keys and the space bar, select the test that you want to run
on the desired disk. At each selection a chevron >> appears.
v
Select the Run Screen option at the bottom of the window. All the tests
previously selected are started.
When the hard disk has been successfully tested, the Fixed Disk Test Category
window appears again. The test result appears in front of each selected test.
Is the diagnostic error free?
Yes
No
002
Go to
IBM Personal Computer 300 Series, 700 Series, IntelliStation;
Hardware Maintenance Manual
, S83G-7789.
003
You must restore the Nways Switch administration station disk after its replacement.
Use the following table to select the procedure according to the hard disk that you
have changed.
Hard Disk Exchanged Go to
You have changed the first disk Step 004
You have changed the second
disk Step 008 on page 5-25
004
– You have changed the first hard disk; continue, using the following procedure.
v
Press Esc to exit from the test window.
v
Select Quit in the title bar, then press Enter.
v
The following window appears:
Exit Diags
Park HD
Reboot
About
v
Remove the Diagnostics diskette.
MAP 0520 (continued)
5-22
2220 Setup and Service Guide