IBM xSeries 300, Руководство по обслуживанию

Страница: 68 / 160

MAP 0400: Nways Switch Administration Station Symptom
001
– Check that the Nways Switch administration station and its display are powered
on.
– If not, switch on the power-on button on the Nways Switch administration station
front panel or display.
Is the Nways Switch administration station powered on?
Yes
No
002
Go to IBM Personal Computer 300 Series, 700 Series, IntelliStation;
Hardware Maintenance Manual , S83G-7789 to identify the problem. Then if
you have to exchange a FRU, go to Chapter 5. Nways Switch Administration
Station FRU and Display Exchange Procedures.
003
Is there something displayed on the screen?
Yes
No
004
Go to
IBM Personal Computer 300 Series, 700 Series, IntelliStation;
Hardware Maintenance Manual
, S83G-7789 to identify the problem. Then if
you have to exchange a FRU, go to Chapter 5. Nways Switch Administration
Station FRU and Display Exchange Procedures.
005
Continue the procedure according to the symptom listed in the following table.
Screen symptom Go to:
xxxxxxxx (8 digits) Power-On Self-test (POST) error or
configuration or memory error message displayed. IBM Personal Computer 300
Series, 700 Series, IntelliStation;
Hardware Maintenance Manual,
S83G-7789 to identify the
problem, then if you have to
exchange a FRU, go to
Chapter 5. Nways Switch
Administration Station FRU and
Display Exchange Procedures.
SYSxx-xxxxx OS/2
®
message displayed on screen. Call support for assistance.
The content of the screen appears normal but the size
of the window displayed is smaller than usual. Power off then power on the
display.
Screen appears normal but the track ball or the
keyboard is locked. Step 024 on page 4-5.
None of the previous screen symptoms. Step 006.
006
– The screen content depends on the last operation performed.
4-2
2220 Setup and Service Guide