IBM x3105 - System - 4347, Руководство по обслуживанию, Страница: 36 / 130

v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v
See Chapter 3, “Parts listing, System x3105 Type 4347,” on page 53 to determine which components are
customer replaceable units (CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.
Error code Description Action
163 Real-time clock error occurred.
1. Run the Configuration/Setup Utility program,
select Load Default Settings , make sure that the
date and time are correct, and save the settings.
2. Reseat the battery.
3. Replace the following components one at a time,
in the order shown, restarting the server each
time:
a. Battery
b. (Trained service technician only) System
board
164 Memory configuration changed.
1. Run the configuration/Setup Utility program,
select Load Default Settings , and save the
settings.
2. Reseat the DIMMs.
3. Replace the following components one at a time,
in the order shown, restating the server each
time:
a. Battery
b. (Trained service technician only) System
Board)
184 Power-on password damaged.
1. Run the Configuration/Setup Utility program,
select Load Default Settings , and save the
settings.
2. Reseat the battery.
3. Replace the following components one at a time,
in the order shown, restarting the server each
time:
a. Battery
b. (Trained service technician only) System
board
187 VPD serial number is not set.
1. Run the Configuration/Setup Utility Program, set
the serial number, and save the configuration.
2. (Trained service technician only) Replace the
system board.
189 An attempt was made to access the server
with an incorrect password.
Restart the server and enter the administrator
password; then, run the Configuration/Setup Utility
program and change the power-on password.
289 A DIMM has been disabled by the user or
by the system.
1. If the DIMM was disabled by the user, run the
Configuration/Setup Utility program and enable
the DIMM.
2. Make sure that the DIMM is installed correctly
(see “Removing a memory module” on page 67).
3. Reseat the DIMM.
4. Replace the DIMM.
18
IBM System x3105 Type 4347: Problem Determination and Service Guide