IBM x3100 M5 Type 5457, Инструкция по установке и обслуживанию

Страница: 405 / 688

80030112-0601ffff Sensor [SensorElementName] has asserted. (SMM Mode, SMM Monitor)
Explanation: This message is for the use case when an implementation has detected a Sensor has asserted.
May also be shown as 800301120601ffff or 0x800301120601ffff
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0508
SNMP Trap ID:
Automatically notify Support: No
User response: No action; information only.
8007010f-2201ffff Sensor [SensorElementName] has transitioned from normal to non-critical state. (GPT Status)
Explanation: This message is for the use case when an implementation has detected a Sensor transitioned to
non-critical from normal.
May also be shown as 8007010f2201ffff or 0x8007010f2201ffff
Severity: Warning
Alert Category: Warning - Other
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0520
SNMP Trap ID: 60
Automatically notify Support: No
User response:
1. Check the IBM support site for service bulletins or firmware updates that apply to this GPT error.
2. Set the UEFI setting DISK GPT Recovery to Automatic.
3. Replace the corrupt disk.
8007010f-2582ffff Sensor [SensorElementName] has transitioned from normal to non-critical state. (I/O
Resources)
Explanation:
This message is for the use case when an implementation has detected a Sensor transitioned to
non-critical from normal.
May also be shown as 8007010f2582ffff or 0x8007010f2582ffff
Severity: Warning
Alert Category: Warning - Other
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0520
SNMP Trap ID: 60
Automatically notify Support: No
User response:
Complete the following step to solve PCI I/O resource errors:
1.
Go to F1 Setup
2.
System Settings
3. Device and I/O ports
4. PCI 64 bit Resource and choose enable
80030112-0601ffff • 8007010f-2582ffff
Appendix A. Integrated management module II (IMM2) error messages
389