IBM System x3650 M5 Скачать руководство пользователя страница 727

Страница: 727 / 1010

816f020d-040effff

Failure no longer Predicted on drive [StorageVolumeElementName] for array

[ComputerSystemElementName]. (Drive 14)

Explanation:

This message is for the use case when an implementation has detected an Array Failure is no longer

Predicted.

May also be shown as 816f020d040effff or 0x816f020d040effff

Severity:

Info

Alert Category:

System - Predicted Failure

Serviceable:

CIM Information: Prefix:

PLAT and

ID:

0169

SNMP Trap ID:

Automatically notify Support:

User response:

No action; information only.

816f020d-040fffff

Failure no longer Predicted on drive [StorageVolumeElementName] for array

[ComputerSystemElementName]. (Drive 15)

Explanation:

This message is for the use case when an implementation has detected an Array Failure is no longer

Predicted.

May also be shown as 816f020d040fffff or 0x816f020d040fffff

Severity:

Info

Alert Category:

System - Predicted Failure

Serviceable:

CIM Information: Prefix:

PLAT and

ID:

0169

SNMP Trap ID:

Automatically notify Support:

User response:

No action; information only.

816f020d-0410ffff

Failure no longer Predicted on drive [StorageVolumeElementName] for array

[ComputerSystemElementName]. (Drive 16)

Explanation:

This message is for the use case when an implementation has detected an Array Failure is no longer

Predicted.

May also be shown as 816f020d0410ffff or 0x816f020d0410ffff

Severity:

Info

Alert Category:

System - Predicted Failure

Serviceable:

CIM Information: Prefix:

PLAT and

ID:

0169

SNMP Trap ID:

Automatically notify Support:

User response:

No action; information only.

816f020d-040effff • 816f020d-0410ffff

Appendix A. Integrated management module II (IMM2) error messages

711

Содержание System x3650 M5



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание System x3650 M5

Отзывы:

IBM System x3650 M5, Инструкция по установке и обслуживанию, Страница: 727 / 1010

Результаты поиска

Содержание System x3650 M5

Отзывы: