IBM System x3650 M5 Скачать руководство пользователя страница 222 | Manualshive

Страница: 222 / 1010

IBM System x3650 M5 Скачать руководство пользователя страница 222

Removing an EIA assembly

Use the following instructions to remove an EIA assembly for 2.5-inch and 3.5-inch
models.

2.5-inch model:

There are the right EIA assembly and the left EIA assembly on

the server, use the following steps to remove them.

For the right EIA assembly

1.

Read the safety information that begins on “Safety” on page vii and
“Installation guidelines” on page 283.

2.

Turn off the server and peripheral devices, and disconnect the power cord and
all external cables.

3.

Remove the cover (see “Removing the top cover” on page 146).

4.

Remove the fan cage assembly (see “Removing the fan cage assembly” on
page 172).

5.

Disconnect the front USB/operator information panel cables form the
connector mounted on the chassis side.

Note:

Disengage all latches, release tabs or locks on cable connectors when

you disconnect all cables from the system board. Failing to release them before
removing the cables will damage the cable sockets on the system board. The
cable sockets on the system board are fragile. Any damage to the cable sockets
may require replacing the system board.

6.

Loosen screws and remove them.

Front USB / operator
information panel cable

Figure 138. Front USB/operator information panel cable removal

206

System x3650 M5 Type 5462: Installation and Service Guide

«
...
220
221
222
223
224
...
»

Содержание System x3650 M5



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов