IBM System x3650 M5 Скачать руководство пользователя страница 683

Страница: 683 / 1010

816f000d-0408ffff

The Drive [StorageVolumeElementName] has been removed from unit

[PhysicalPackageElementName]. (Drive 8)

Explanation:

This message is for the use case when an implementation has detected a Drive has been Removed.

May also be shown as 816f000d0408ffff or 0x816f000d0408ffff

Severity:

Error

Alert Category:

Critical - Hard Disk drive

Serviceable:

Yes

CIM Information: Prefix:

PLAT and

ID:

0163

SNMP Trap ID:

Automatically notify Support:

User response:

Reseat hard disk drive n.(n = hard disk drive number). Wait 1 minute or more before reinstalling the drive.

Replace the hard disk drive.

Make sure that the disk firmware and RAID controller firmware are at the latest level.

Replace backplane.

816f000d-0409ffff

The Drive [StorageVolumeElementName] has been removed from unit

[PhysicalPackageElementName]. (Drive 9)

Explanation:

This message is for the use case when an implementation has detected a Drive has been Removed.

May also be shown as 816f000d0409ffff or 0x816f000d0409ffff

Severity:

Error

Alert Category:

Critical - Hard Disk drive

Serviceable:

Yes

CIM Information: Prefix:

PLAT and

ID:

0163

SNMP Trap ID:

Automatically notify Support:

User response:

Reseat hard disk drive n.(n = hard disk drive number). Wait 1 minute or more before reinstalling the drive.

Replace the hard disk drive.

Make sure that the disk firmware and RAID controller firmware are at the latest level.

Replace backplane.

816f000d-0408ffff • 816f000d-0409ffff

Appendix A. Integrated management module II (IMM2) error messages

667

Содержание System x3650 M5



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание System x3650 M5

Отзывы:

IBM System x3650 M5, Инструкция по установке и обслуживанию, Страница: 683 / 1010

Результаты поиска

Содержание System x3650 M5

Отзывы: