IBM System x3650 M5 Скачать руководство пользователя страница 596

Страница: 596 / 1010

806f060d-041bffff

Array [ComputerSystemElementName] has failed. (Drive 27)

Explanation:

This message is for the use case when an implementation has detected that an Array Failed.

May also be shown as 806f060d041bffff or 0x806f060d041bffff

Severity:

Error

Alert Category:

Critical - Hard Disk drive

Serviceable:

Yes

CIM Information: Prefix:

PLAT and

ID:

0176

SNMP Trap ID:

Automatically notify Support:

Yes

User response:

Make sure that the RAID adapter firmware and hard disk drive firmware are at the latest level.

Make sure that the SAS cable is connected correctly.

Replace the SAS cable.

Replace the RAID adapter.

Replace the hard disk drive that is indicated by a lit status LED.

806f060d-041cffff

Array [ComputerSystemElementName] has failed. (Drive 28)

Explanation:

This message is for the use case when an implementation has detected that an Array Failed.

May also be shown as 806f060d041cffff or 0x806f060d041cffff

Severity:

Error

Alert Category:

Critical - Hard Disk drive

Serviceable:

Yes

CIM Information: Prefix:

PLAT and

ID:

0176

SNMP Trap ID:

Automatically notify Support:

Yes

User response:

Make sure that the RAID adapter firmware and hard disk drive firmware are at the latest level.

Make sure that the SAS cable is connected correctly.

Replace the SAS cable.

Replace the RAID adapter.

Replace the hard disk drive that is indicated by a lit status LED.

806f060d-041bffff • 806f060d-041cffff

580

System x3650 M5 Type 5462: Installation and Service Guide

Содержание System x3650 M5



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание System x3650 M5

Отзывы:

IBM System x3650 M5, Инструкция по установке и обслуживанию, Страница: 596 / 1010

Результаты поиска

Содержание System x3650 M5

Отзывы: