IBM System x3650 M5 Скачать руководство пользователя страница 456

Страница: 456 / 1010

806f0108-0a02ffff

[PowerSupplyElementName] has Failed. (Power Supply 2)

Explanation:

This message is for the use case when an implementation has detected a Power Supply has failed.

May also be shown as 806f01080a02ffff or 0x806f01080a02ffff

Severity:

Error

Alert Category:

Critical - Power

Serviceable:

Yes

CIM Information: Prefix:

PLAT and

ID:

0086

SNMP Trap ID:

Automatically notify Support:

Yes

User response:

Reseat power supply n.

If the power-on LED is not lit and the power-supply error LED is lit, replace power supply n.

If both the power-on LED and the power-supply error LED are not lit, see Power problems for more information.

(n = power supply number)

806f0109-1301ffff

[PowerSupplyElementName] has been Power Cycled. (Host Power)

Explanation:

This message is for the use case when an implementation has detected a Power Unit that has been

power cycled.

May also be shown as 806f01091301ffff or 0x806f01091301ffff

Severity:

Info

Alert Category:

System - Other

Serviceable:

CIM Information: Prefix:

PLAT and

ID:

0108

SNMP Trap ID:

Automatically notify Support:

User response:

No action; information only.

806f010c-2001ffff

Uncorrectable error detected for [PhysicalMemoryElementName] on Subsystem

[MemoryElementName]. (DIMM 1)

Explanation:

This message is for the use case when an implementation has detected a Memory uncorrectable error.

May also be shown as 806f010c2001ffff or 0x806f010c2001ffff

Severity:

Error

Alert Category:

Critical - Memory

Serviceable:

Yes

CIM Information: Prefix:

PLAT and

ID:

0138

SNMP Trap ID:

Automatically notify Support:

Yes

User response:

Check the IBM support website for an applicable retain tip or firmware update that applies to this memory error.

Swap the affected DIMMs (as indicated by the error LEDs on the system board or the event logs) to a different

memory channel or microprocessor.

If the problem follows the DIMM, replace the failing DIMM.

806f0108-0a02ffff • 806f010c-2001ffff

440

System x3650 M5 Type 5462: Installation and Service Guide

Содержание System x3650 M5



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание System x3650 M5

Отзывы:

IBM System x3650 M5, Инструкция по установке и обслуживанию, Страница: 456 / 1010

Результаты поиска

Содержание System x3650 M5

Отзывы: