IBM System x3650 M5 Скачать руководство пользователя страница 211

Страница: 211 / 1010

12.

Perform any configuration tasks that are required for the adapter.

13.

Reinstall the top cover (see “Replacing the top cover” on page 147).

14.

Slide the server into the rack.

15.

Reconnect the power cords and any cables that you removed.

16.

Turn on the peripheral devices and the server.

Replacing an adapter in PCI expansion slot 4 or slot 5:

Use this section to replace an adapter in PCI expansion slot 4 or slot 5.

About this task

To replace an adapter, complete the following steps:

Procedure

Read the safety information that begins on “Safety” on page vii and
“Installation guidelines” on page 283.

Turn off the server and peripheral devices and disconnect the power cords
and all external cables.

Remove the server top cover (see “Removing the top cover” on page 146).

▌1▐

Rotate the bracket to the open position.

Slide the expansion-slot cover out of the server.

PCI riser-card
assembly 2

PCI riser-card
assembly 1

Shipping bracket for
riser-card assembly

Figure 125. Riser-card assembly installation - full-height, full-length adapters

Chapter 5. Removing and replacing components

195

Содержание System x3650 M5



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание System x3650 M5

Отзывы:

IBM System x3650 M5, Инструкция по установке и обслуживанию, Страница: 211 / 1010

Результаты поиска

Содержание System x3650 M5

Отзывы: