IBM System x3650 M5, Инструкция по установке и обслуживанию, Страница: 147 / 1010

Chapter 5. Removing and replacing components
Use this information to remove and replace the server components.
The types of replaceable components are:
v
Structural parts: Purchase and replacement of structural parts (components, such
as chassis assembly, top cover, and bezel) is your responsibility. If IBM acquires
or installs a structural component at your request, you will be charged for the
service.
v
Tier 1 customer replaceable unit (CRU):
Replacement of Tier 1 CRUs is your
responsibility. If IBM installs a Tier 1 CRU at your request, you will be charged
for the installation.
v
Tier 2 customer replaceable unit: You may install a Tier 2 CRU yourself or
request IBM to install it, at no additional charge, under the type of warranty
service that is designated for your server.
See Chapter 4, “Parts listing, System x3650 M5 Type 5462,” on page 121 to
determine whether a component is a structural part, Tier 1 CRU, or Tier 2 CRU.
For information about the terms of the warranty, see the Warranty Information
document that comes with the server.
For more information about getting service and assistance, see Appendix D,
“Getting help and technical assistance,” on page 973.
Returning a device or component
If you are instructed to return a device or component, follow all packaging
instructions, and use any packaging materials for shipping that are supplied to
you.
Internal cable routing and connectors
This section provides information about routing the cables when you install some
components in the server.
Note: Disengage all latches, release tabs or locks on cable connectors when you
disconnect all cables from the system board. Failing to release them before
removing the cables will damage the cable sockets on the system board. The cable
sockets on the system board are fragile. Any damage to the cable sockets may
require replacing the system board.
© Copyright IBM Corp. 2014
131