IBM System x3650 M5 Скачать руководство пользователя страница 592

Страница: 592 / 1010

806f060d-0413ffff

Array [ComputerSystemElementName] has failed. (Drive 19)

Explanation:

This message is for the use case when an implementation has detected that an Array Failed.

May also be shown as 806f060d0413ffff or 0x806f060d0413ffff

Severity:

Error

Alert Category:

Critical - Hard Disk drive

Serviceable:

Yes

CIM Information: Prefix:

PLAT and

ID:

0176

SNMP Trap ID:

Automatically notify Support:

Yes

User response:

Make sure that the RAID adapter firmware and hard disk drive firmware are at the latest level.

Make sure that the SAS cable is connected correctly.

Replace the SAS cable.

Replace the RAID adapter.

Replace the hard disk drive that is indicated by a lit status LED.

806f060d-0414ffff

Array [ComputerSystemElementName] has failed. (Drive 20)

Explanation:

This message is for the use case when an implementation has detected that an Array Failed.

May also be shown as 806f060d0414ffff or 0x806f060d0414ffff

Severity:

Error

Alert Category:

Critical - Hard Disk drive

Serviceable:

Yes

CIM Information: Prefix:

PLAT and

ID:

0176

SNMP Trap ID:

Automatically notify Support:

Yes

User response:

Make sure that the RAID adapter firmware and hard disk drive firmware are at the latest level.

Make sure that the SAS cable is connected correctly.

Replace the SAS cable.

Replace the RAID adapter.

Replace the hard disk drive that is indicated by a lit status LED.

806f060d-0413ffff • 806f060d-0414ffff

576

System x3650 M5 Type 5462: Installation and Service Guide

Содержание System x3650 M5



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание System x3650 M5

Отзывы:

IBM System x3650 M5, Инструкция по установке и обслуживанию, Страница: 592 / 1010

Результаты поиска

Содержание System x3650 M5

Отзывы: