IBM System x3650 M5, Инструкция по установке и обслуживанию, Страница: 402 / 1010

80010902-0701ffff Numeric sensor [NumericSensorElementName] going high (upper critical) has asserted.
(SysBrd 12V)
Explanation: This message is for the use case when an implementation has detected an Upper Critical sensor going
high has asserted.
May also be shown as 800109020701ffff or 0x800109020701ffff
Severity: Error
Alert Category: Critical - Voltage
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0494
SNMP Trap ID:
1
Automatically notify Support: Yes
User response: If the specified sensor is Planar 3.3V or Planar 5V, (trained technician only) replace the system board.
If the specified sensor is Planar 12V, complete the following steps until the problem is solved:
1. Check power supply n LED.
2. Remove the failing power supply.
3. (Trained technician only) Replace the system board. (n = power supply number)
80010b01-0701ffff Numeric sensor [NumericSensorElementName] going high (upper non-recoverable) has
asserted. (RS1 RR Amb Temp)
Explanation:
This message is for the use case when an implementation has detected an Upper Non-recoverable
sensor going high has asserted.
May also be shown as 80010b010701ffff or 0x80010b010701ffff
Severity: Error
Alert Category: Critical - Temperature
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0498
SNMP Trap ID: 0
Automatically notify Support: No
User response:
1. Make sure that the fans are operating, that there are no obstructions to the airflow (front and rear of the server),
that the air baffle is in place and correctly installed, and that the server cover is installed and completely closed.
2. Check the ambient temperature. You must be operating within the specifications (see Server Features and
specifications for more information).
3. (Trained technician only) Replace system board.
80010902-0701ffff • 80010b01-0701ffff
386
System x3650 M5 Type 5462: Installation and Service Guide