IBM Netfinity 3000, Руководство пользователя

Страница: 99 / 370

Using the SCSISelect Utility program
Depending on the hard disk capacity, the low-level format program
could take up to two hours.
When to use the Format Disk program
Use the Format Disk program:
Ÿ
When you are installing software that requires a low-level
format
Ÿ
When you get recurring messages from the diagnostic tests
directing you to run the Low-Level Format program on the hard
disk
Ÿ
As a last resort before replacing a failing hard disk drive
Note: For information about backing up all of your files, see your
operating-system documentation.
Starting the low-level format
Attention:
The low-level format erases all data and programs.
1. If the hard disk drive is working, make a backup copy of all the
files and programs on the hard disk.
2. Select Format Disk; then, follow the instructions on the screen.
Note: Hard disks normally contain more tracks than their stated
capacity (to allow for defective tracks). A message
appears on the screen if the defect limit is reached. If this
happens, have the system serviced.
3. To install an operating system after the hard disk is formatted,
follow the instructions in the ServerGuide package that comes
with your server.
Chapter 3. Configuring your server
65