IBM Netfinity 3000, Руководство пользователя

Страница: 138 / 370

Installing or removing internal drives
Drive specifications
Table 3 describes some of the drive types that you can install in
each bay, and their width and height requirements.
Table 3. Maximum allowable drive sizes
Bays Drive widths Drive types Drive height
1 3.5-inch 6
5.25-inch
Removable media 7
drive, hard disk
drive
CD-ROM drive
25.4 mm (1.0 in.)
41.3 mm (1.6 in.)
9
2 3.5-inch 6
5.25-inch
Removable media 7
drive, hard disk
drive
25.4 mm (1.0 in.)
41.3 mm (1.6 in.) 9
3 3.5-inch Hard disk drive 8 25.4 mm (1.0 in.)
4 3.5-inch Diskette drive 25.4 mm (1.0 in.)
5 and 6 3.5-inch Hard disk drive 8 25.4 mm (1.0 in.)
41.3 mm (1.6 in.) 9 , 10
6 To properly install a 3.5-inch drive in bay 1 or 2, use the 3.5-inch conversion kit for a 5.25-inch bay that is already installed in
bay 2. If you are installing a 5.25-inch drive in bay 2, you must first remove the conversion kit.
7 Removable media include CD-ROMs, optical discs, diskettes, and tapes. If you install removable-media drives, you must
install them in bays 1–4 only. The server supports only one diskette drive (standard in bay 4).
8 In some models, the CD-ROM drive might be set as the default startup (or boot) drive. However, if a hard disk drive is
preinstalled, you can change the startup sequence, and specify the hard disk drive as the startup drive. See “Start Options”
on page 42 for information about changing the startup sequence.
9 Drives that are higher than 41.3 mm (1.6 in.) cannot be installed.
10
One slim-high drive has a height of 25.4. mm (1.0 in.). One half-high drive has a height of 41.3 mm (1.6 in.). Therefore, you
can install two slim-high drives or one half-high drive between bays 5 and 6.
104
Netfinity 3000 User's Handbook