IBM Netfinity 3000, Руководство пользователя

Страница: 226 / 370

POST beep codes
POST message Description
5962 A removable media configuration error occurred.
Action:
1. Verify that the Configuration/Setup Utility program correctly
reflects the number of removable-media drives that you have
installed. If the drive information is not correct, change it.
(For instructions on using the Configuration/Setup Utility
program, see “Using the Configuration/Setup Utility
program” on page 39.)
2. If you added or removed a removable-media drive, you must
save the new configuration in the Configuration/Setup
Utility program. See “Using the Configuration/Setup Utility
program” on page 39 for additional information and
instructions on saving the configuration.
If the problem cannot be isolated and corrected, have the system
serviced.
8601
8603 A pointing device or system board error occurred.
Action: Have the system serviced.
I
9990301 A hard disk drive failure occurred.
Action: Have the system serviced.
Other
Numbers The server POST found an error.
Action: Follow the instructions on the screen.
Power-on self-test (POST) beep codes
In some models, one beep and the appearance of text on the
monitor indicate successful completion of POST. More than one
beep indicates that POST detected an error.
Beep codes are sounded in a series of two or three sets of beeps.
The duration of each beep is constant, but the length of the pause
between the beeps varies. For example, a 1–2–4 beep code sounds
like one beep, a pause, two consecutive beeps, another pause, and
four more consecutive beeps.
It is possible to misinterpret beep codes if you do not understand
exactly how they work. Keeping in mind that POST beep codes
vary in the length of the pause, and not the duration of the beep
tones, will help you to distinguish the beeps.
192
Netfinity 3000 User's Handbook