IBM Netfinity 3000, Руководство пользователя

Страница: 219 / 370

POST Messages
POST message Description
1881 A Plug and Play adapter has requested memory resources that
are not available.
Action:
1. Make sure that all ISA legacy adapters and all other adapters
are set correctly in the Configuration/Setup Utility program.
If the memory resource settings are not correct, change and
save the settings. Setting the resources used by ISA legacy
adapters to ISA Resource enables the Plug and Play function
to configure around the legacy adapters.
For information about PCI and ISA adapters, see “Working
with adapters” on page 79. For information about Plug and
Play and legacy (non-Plug and Play) adapters, see “ISA
Legacy Resources” on page 55. For information about the
required memory resource settings for ISA adapters, refer to
the documentation that comes with these adapters. For
information on using the Configuration/Setup Utility
program, see “Using the Configuration/Setup Utility
program” on page 39.
2. Make sure that the switches on all ISA legacy adapters are
set correctly. For information about switch settings, refer to
the documentation that comes with the ISA legacy adapters.
3. If all memory resources are being used by ISA legacy
adapters, you might need to remove an ISA legacy adapter to
make memory available to the PCI adapter that you want to
install. For information on removing adapters, see “Installing
or removing ISA and PCI adapters” on page 82.
Note: If you remove an ISA legacy adapter, set the memory
resources used by the removed adapter to Available
before installing another adapter.
4. If you have other PCI or Plug and Play adapters installed,
you might need to remove one of these adapters to make
memory available to the Plug and Play adapter that you
want to install.
If the problem cannot be isolated and corrected, have the system
serviced.
Chapter 5. Solving problems
185