IBM Netfinity 3000, Руководство пользователя, Страница: 83 / 370

Using the Configuration/Setup Utility program
6. Enter your password again in the appropriate data field,
7. Define the Power-On Password Changeable by User field. The
choices are:
Yes The power-on password can be changed without entering
the administrator password, if the administrator password
is set.
No The power-on password cannot be changed unless the
administrator password is entered, if the administrator
password is set.
8. To change an administrator password, select Change
Administrator Password
from the Administrator Password
menu; then press Enter. Press Esc to exit.
Attention administrator password users:
If an administrator password is set and then forgotten, you must
complete one of the following to regain access to the
Configuration/Setup Utility program:
Ÿ
If enhanced security is disabled (default setting), you must
remove the server cover and move the Clear CMOS Request
jumper on the system board. (See “Erasing lost or forgotten
passwords” on page 254 for further information.)
Ÿ
If enhanced security is enabled, you must replace the system
board.
To delete an administrator password:
1. From the Configuration/Setup Utility program menu, select
System Security ; then, press Enter.
2. The System Security menu appears.
3. Select Administrator Password; then, press Enter.
4. The Administrator Password menu appears.
5. Select Administrator Password.
6. Select Delete Administrator Password; then press Enter. Press
Esc to exit.
Chapter 3. Configuring your server
49