IBM Netfinity 3000, Руководство пользователя

Страница: 290 / 370

Erasing lost or forgotten passwords
4. Turn off the server.
5. Turn the server back on.
6. CMOS memory is now cleared and the passwords have been
erased. After the POST completes, configuration error messages
are displayed.
Note: You might not be able to turn off the power using the
power switch until POST is nearly complete. Unplug the
power cord to turn off your server.
7. Follow the instructions on the screen to continue.
8. When the Configuration/Setup Utility program starts, make the
necessary changes, save the settings, and exit setup. You must
update the server configuration. See “Updating the server
configuration” on page 153 for instructions. When you see a
message that instructs you to move the jumper to the normal
position, turn off the server.
9. Disconnect the power cord from the rear of the chassis.
10. Remove the server cover, and move the jumper back to its
normal position (pins 1 and 2).
1
2
3
1
2
3
1
2
3
11. After clearing CMOS memory, you must reconfigure the server.
After reassembling the server (see “Completing the installation”
on page 148), use the Configuration/Setup Utility program to
reset the date and time, reset any passwords, and reconfigure
256
Netfinity 3000 User's Handbook