IBM Netfinity 3000, Руководство пользователя

Страница: 242 / 370

Troubleshooting
Microprocessor
problems
Action
The server emits a
continuous tone during
POST. The microprocessor is not working properly.
1. Replace the microprocessor. Restart the server.
2. If you receive the error code 167 after you install a
new microprocessor, run the Flash Utility program.
Insert the Flash BIOS Diskette into the primary
diskette drive and run the flash program. Follow
the instructions in the program.
For information on error code 167, see the
description in the “POST message table” on
page 169.
3. If you installed a new microprocessor in your
server, you must reconfigure your server. Follow
the procedure described in “Using the
Configuration/Setup Utility program” on page 39.
4. Refer to your operating-system documentation.
You might need to make changes so that the
operating system recognizes the new
microprocessor.
If the problem still exists, have the system serviced.
Keyboard, mouse,
or pointing-
device problems
Action
All or some keys on the
keyboard do not work. Verify that:
1. The server and the monitor are turned on.
2. The keyboard cable is securely connected to the
keyboard connector on the server. For the location
of the keyboard connector, see “Input/output
connectors” on page 11.
If the problem cannot be isolated and corrected, have
the keyboard and system serviced.
208
Netfinity 3000 User's Handbook