IBM Netfinity 3000, Руководство пользователя, Страница: 65 / 370

Using the CD-ROM drive
The following illustration shows the front of the CD-ROM drive.
CD-ROM Drive
In-Use Light Emergency-Eject
Hole Eject/Load
Button
Handling a CD
When handling a CD, follow these guidelines:
Ÿ
Hold the CD by its edges. Do not touch the surface.
Ÿ
To remove dust or fingerprints, wipe the CD from the center to
the outside. Wiping the CD in a circular direction might cause
loss of data.
Ÿ
Do not write or stick paper on the CD.
Ÿ
Do not scratch or mark the CD.
Ÿ
Do not place or store the CD in direct sunlight.
Ÿ
Do not use benzene, thinners, or other cleaners to clean the CD.
Ÿ
Do not drop or bend the CD.
Loading and unloading a CD
Note: Before you load or unload a CD, be sure that you have
turned on the server.
To load and unload a CD in a CD-ROM drive:
1. Press the Eject/Load button. The tray slides out of the drive.
(Do not manually force the tray open.)
2. Place the CD in the tray with the label facing up.
3. Close the tray by pressing the Eject/Load button, or by gently
pushing the tray forward. When the tray is closed, the
CD-ROM drive in-use light on the front of the drive will
activate to indicate that the drive is in use.
Chapter 2. Getting started
31