IBM Netfinity 3000, Руководство пользователя

Страница: 95 / 370

Configuring the Ethernet controller
controller for your operating system before you use the Ethernet
controller.
Notes:
1. For information on Ethernet indicators, see “Status indicators”
on page 10.
2. For information on the Ethernet connector, see “Input/output
connectors” on page 11 and “Ethernet connector” on page 143.
3. For troubleshooting information, see “Troubleshooting the
10/100 Mbps Ethernet controller” on page 217.
4. The Ethernet controller supports the operating systems that your
server supports. To find out which operating systems your
server supports, go to the following World Wide Web address:
http://www.ibm.com/netfinity/
If you need additional Ethernet connections, you can install an
Ethernet adapter, such as an IBM 10/100 Ethernet adapter. Review
your network-adapter documentation for any additional
configuration requirements.
Note: If you are installing an IBM 10/100 Ethernet adapter, be sure
to run the Ethernet controller diagnostics and record the
server's Ethernet controller configuration information before
you install the adapter.
Chapter 3. Configuring your server
61