IBM Netfinity 3000, Руководство пользователя

Страница: 43 / 370

Controls and indicators
Power Switch: Press this switch to turn your server on
or off.
Attention:
Do not turn off the server if a drive in-use light is on. This
might damage the information stored on a hard disk or on a
diskette.
When the power is on, there is a period of time during the
power-on self-test (POST), a short test that occurs when the
server is turned on, when a single touch of the power switch
will not turn off the power. If power must be turned off
during POST, press and hold the power switch for 5 seconds
or disconnect the power cord. After POST, the power switch
works normally, unless the server is in a hang condition. If
the server is in a hang condition, press and hold the power
switch until the power turns off.
CD-ROM Eject/Load Button: Push this button to release a
CD from the CD-ROM drive. See “Using the CD-ROM
drive” on page 30 for additional information about the
CD-ROM drive controls and indicators.
Diskette Eject Button: Push this button to release a diskette
from the diskette drive.
Chapter 1. Introducing your Netfinity 3000 server
9