IBM BladeCenter HS22V 7871, Руководство по диагностике и обслуживанию

Страница: 86 / 258

Removing a USB Flash key
Use this information to remove a USB Flash key from the blade server.
The following illustration shows the removal of a USB Flash key from the blade
server.
To remove the USB Flash key, complete the following steps.
1. Before you begin, read “Safety” on page v and “Installation guidelines” on
page 49.
2. If the blade server is installed in a BladeCenter unit, remove it (see “Removing
the blade server from the BladeCenter unit” on page 52).
3.
Remove the blade server cover (see “Removing the blade server cover” on page
55).
4. If an optional expansion unit is installed, remove the expansion unit (see
“Removing an optional expansion unit” on page 57).
5. If an optional CIOv expansion card is installed, remove the CIOv expansion
card (see “Removing a CIOv-form-factor expansion card” on page 74).
6. Locate the USB Flash key on the system board (see “Blade server connectors”
on page 14).
7. Using your fingers, push the USB Flash key out of the connector. It is
recommended to use your finger to push the shoulder of the USB Flash key
away from the connector.
8.
If you are instructed to return the USB Flash key, follow all packaging
instructions, and use any packaging materials for shipping that are supplied to
you.
70
BladeCenter HS22V Type 7871 and 1949: Problem Determination and Service Guide