IBM 86655RY - Netfinity 7600 - 8665, Руководство по техническому обслуживанию аппаратной части, Страница: 59 / 294

Configuring the server
49
Using the SCSISelect utility program
SCSISelect is a built-in, menu-driven configuration utility program that you can use
to:
• View the default SCSI IDs
• Locate and correct configuration conflicts
• Perform a low-level format on a SCSI hard disk
The following sections provide the instructions needed to start the SCSISelect Utility
and descriptions of the menu choices available.
Note: If the server has a RAID adapter installed, use the configuration method
supplied with the RAID adapter to view or change SCSI settings for RAID
attached devices.
Starting the SCSISelect utility program
To start the SCSISelect utility program:
1. Turn on the server.
2. When the <<< Press <CTRL><A> for SCSISelect™ Utility! >>> prompt appears,
press Ctrl+A.
Note: If an administrator password has been set, a prompt appears asking you to
enter the password to start the SCSISelect Utility program.
3. When prompted, select either channel A (external) or channel B (internal).
4. Use the arrow keys to select a choice from the menu.
• Press Esc to return to the previous menu.
• Press the F5 key to switch between color and monochrome modes (if the
monitor permits).
5. Follow the instructions on the screen to change the settings of the selected items;
then, press Enter.
Table 6. Power-on and administrator password features.
Type of password Results
Power-on password • Enter the password to complete the system startup.
• All choices are available on the Configuration/Setup Utility main menu.
Administrator password • No password is required to start the system.
• Enter the password to access the Configuration/Setup Utility program.
• All choices are available on the Configuration/Setup Utility main menu.
Administrator and power-on
password • You can enter either password to complete the system startup.
• The administrator password provides access to all choices on the
Configuration/Setup Utility main menu. You can set, change, or delete both the
administrator and power-on passwords, and allow a power-on password to be
changed by the user.
• The power-on password provides access to a limited set of choices on the
Configuration/Setup Utility main menu. This limited access might include
changing or deleting the power-on password.