IBM 86655RY - Netfinity 7600 - 8665, Руководство по техническому обслуживанию аппаратной части

Страница: 178 / 294

168
Hardware Maintenance Manual: Netfinity 7600 – Type 8665 Models 1RY, 2RY
Using the IPSSEND command-line program
The IPSSEND command-line program provides a number of functions. Some of these
functions are useful as diagnostic or error-recovery tools. This manual addresses only
these diagnostic and error-recovery functions. Descriptions of the other functions of
the IPSSEND command-line program can be found in the documentation that
shipped with the controller.
When you run IPSSEND with no parameters, a list of available functions and their
specific parameters appears. The available functions and their parameters are
described in the sections that follow.
To run the IPSSEND program with no parameters:
• If you are using Windows NT 4.0, Windows 2000, or OS/2:
1. Type:
c: \ipsadm\ipssend
where c is the drive letter of the drive where Windows NT 4.0, Windows 2000,
or OS/2 is installed.
2. Press Enter.
• If you are using NetWare:
1. From the console, type:
load ipssend
2. Press Enter.
• If you are using Linux, OpenServer, or UnixWare:
1. Type:
/usr/bin/ipssend
2. Press Enter.
• If you are using DOS:
1. Insert the startable IPSSEND diskette into diskette drive A; then type:
a :\ipssend
where a is the drive letter of the diskette drive.
2. Press Enter.
Server roll-out functions
Server roll-out functions are for server roll-out and building systems only; these
functions are not for restoring systems. Do not use these commands for servicing
systems.
The following lists the IPSSEND server roll-out functions:
• autosync
• backup
• copyId
• init
• restore
• synch