IBM 86655RY - Netfinity 7600 - 8665, Руководство по техническому обслуживанию аппаратной части

Страница: 117 / 294

Netfinity Manager
107
b. In the DB2 command window, type the following command:
DB2 BIND x:\directory\DB2SQLC0.bnd
where x:\directory is the name of the drive and directory where Netfinity
Manager is installed.
c. Press Enter.
Granting and revoking database privileges
The following information describes how to grant and revoke database privileges.
Note: If your primary system is OS/2, refer to “Database privileges on OS/2
systems”.
1. Start a DB2 command window.
Notes:
a.If it is not already running, start the DB2 database manager.
b.If you are not connected to the DB2 Netfinity database now connect to the
database.
2. Type the following command:
DB2 GRANT privilegecode ON TABLE tablename TO userid
where
• privilegecode is one of the following privilege codes:
— ALL
— ALL PRIVILEGES
Note: Grants all the appropriate privileges, except CONTROL, on the
database.
— ALTER
— CONTROL
— DELETE
— INDEX
— INSERT
— REFERENCES
— SELECT
— UPDATE
• tablename is the name of the table as specified during database installation. A
listing of the Netfinity database table names can be found in the Netfinity
User’s Guide (Appendix H: Netfinity Relational Database Tables).
Note: The Netfinity Database Administration Tool can also be used to
GRANT or REVOKE privileges.
• userid is the user ID to be granted access
3. Press Enter to execute the command.
To revoke privileges, substitute REVOKE for GRANT in the command line.
Database privileges on OS/2 systems:
1. Use the GRANT EXECUTE command to enable Netfinity Manager to access the
database.
Type the following command at the OS/2 prompt:
DB2 GRANT EXECUTE ON PACKAGE NETFIN.DB2SQLC0 TO PUBLIC