IBM 315, Руководство пользователя

Страница: 161 / 245

Error Messages
POST Message Description
662 A diskette drive configuration error occurred.
Action: If you removed a diskette drive, make sure that the
diskette drive setting is correct in the
Configuration/Setup utility program. If the setting is
not correct, change the setting. For instructions on
using the Configuration/Setup utility program, see
Chapter 2, “Configuring Your Server” on page 15.
962 A parallel-port configuration error occurred.
Action: If you changed a hardware option, make sure the
parallel port setting is correct in the
Configuration/Setup utility program. If the setting is
not correct, change the setting. For instructions on
using the Configuration/Setup utility program, see
Chapter 2, “Configuring Your Server” on page 15.
11XX A failure occurred during testing of the system-board serial
port.
Action: If you have a modem, serial printer, or other serial
device attached to your server, verify that the serial
cable is connected correctly. If it is, use the following
procedure:
1. Turn off the server.
2. Disconnect the serial cable from the serial port.
3. Turn on the server.
If the POST error message does not reappear, either the serial
cable or the device is probably failing. (See the
documentation that comes with the serial device for
additional testing information.)
If the POST error message reappears, have the system
serviced.
1162 A serial port configuration error occurred.
Action: If you changed a hardware option, make sure the
serial port setting is correct in the Configuration/Setup
utility program. If the setting is not correct, change the
setting. For instructions on using the
Configuration/Setup utility program, see Chapter 2,
“Configuring Your Server” on page 15.
Chapter 4. Solving Problems
147