IBM 315, Руководство пользователя

Страница: 39 / 245

Using the Configuration/Setup Utility Program
System Security
To control access to your server, you can implement the security
features described in your User's Reference, including defining two
levels of password protection and restricting diskette drive access.
The System Security choice appears only on the full
Configuration/Setup menu.
Password Overview
Your server supports both a power-on password and an
administrator password.
If passwords are set, the server displays the Enter password prompt
when:
Ÿ The password prompt is set to On and a power-on password is
set.
Ÿ The password prompt is set to On and a power-on password
and an administrator password are set.
Ÿ An administrator password is the only password set.
Ÿ You enter the Configuration/Setup utility program.
Ÿ
You start the server from a diskette.
The server does not display a password prompt when:
Ÿ
No passwords are set.
Ÿ The password prompt is set to Off, only a power-on password
is set, and the server is not being started from a diskette.
In this case, the server starts, but the keyboard is locked. The
keyboard can be unlocked by entering the power-on password.
The passwords do not appear on the screen as you type them.
When you enter the correct password,
OK appears on the screen. If
you enter the wrong password, Incorrect password appears on the
screen, and Enter password is again displayed. After three incorrect
attempts, you must turn off the server and start again.
Chapter 2. Configuring Your Server
23