IBM 315, Руководство пользователя

Страница: 143 / 245

Testing the System
configuration check. The diagnostic program then runs the
tests for each of the devices or modules found during the
configuration check. Upon completion of the Quick Check,
you are prompted to:
Press any key to continue .
Pressing any key then returns you to the Diagnostics Menu.
– Module Tests allow you to more rigorously test an
individual module (or device such as a diskette drive) or
specify a group of tests for several modules. In addition,
you can specify how many times to run an individual test
and how the test program should note and log any errors
that it finds. See “Using the Module Tests” on page 135 for
more information about running the module tests.
– Options allow you to set or change defaults that affect the
reporting, error logging, and presentation of the error
information. For more information about the options
available, see “Test Options” on page 137.
Ÿ System Info : When you select this choice from the Main Menu,
the System Info Menu appears. The System Info Menu allows
you to view the server's hardware and software configuration
information. For example, you can view the IRQ and DMA
assignments, memory usage, address and attribute information
for device drivers, and so on.
Ÿ
Reports : When you select this choice from the Main Menu, the
Reports Menu appears. The Reports Menu allows you to print
the system information.
Ÿ
Utilities : When you select this choice from the Main Menu, the
Utilities Menu appears. The Utilities Menu provides access to
additional programs on the PC Server 315 System Board
Diagnostic diskette. These utility programs include: RAM Chip
Locator, File Editor, Format Diskette, and Hard Disk Utilities.
For more information about the File Editor, see “Using the File
Editor” on page 178.
Ÿ
Exit : Select this choice to exit from the PC Server 315 System
Board Diagnostic diskette.
Chapter 4. Solving Problems
129